REBUG: 3.41.3 and 3.55.2 OTHEROS++

[/GriFFin]

Following up to their new spoofer version, is the updated OtherOS++ releases by team Codename: REBUG these include all the latest updates, and their new fancy logo that they picked from the recent logo contest we had ran for them here last week on PS3Crunch!


http://www.ps3crunch.net/forum/images/news/RSOS.png


REBUG 3.41.3 and 3.55.2 OTHEROS++

Thanks to the tireless work of the masterminds over at gitbrew.org (http://gitbrew.org/) bringing our beloved OtherOS back to our PS3′s, we are able to give you guys REBUG 3.41.3 and 3.55.2 OtherOS++.

Both of the REBUG OtherOS++ PUP’s will give you 22GB of OtherOS HDD space and have all the features of REBUG plus all the features of gitbrew’s OtherOS++ CFW and of course the ability to set your own QA Token from GameOS using the qa_flag.pkg from over at gitbrew.org (http://7track.org/~glevand/public/).



OR

MAKE YOUR OWN REBUG OTHEROS++
If you want to add OtherOS++ support to REBUG 3.41.3 or 3.55.2 (http://rebug.me/?p=646) yourself, we have provided the patch_lv1_for_rebug.tcl task file for patching the Lv1 Hyperviser with PS3MFW Builder 0.2 (http://ps3mfw.com/).
It is the EXACT patch_lv1.tcl from gitbrew.org (http://gitbrew.org/) minus the lv1 memory mapping and lv1 peek and poke as it is already patched in REBUG.

We can not and will not take any credit for the task file or PS3MFW Builder 0.2 Portable. We have provided them at the bottom of this post on our site for your convenience.

1: Add the patch_lv1_for_rebug.tcl file to the tasks folder of PS3MFW Builder 0.2.
It will appear as Patch Lv1 Hypervisor for REBUG in the task list.
2: Deselect ALL tasks except Patch Lv1 Hypervisor for REBUG and Patch emergency init
3: Press the Configure>> button next to Patch emergency init and
select how big to make your GameOS/OtherOS++ partition
4: Use REBUG 3.41.3 or 3.55.2 (http://rebug.me/?p=646) firmware as your input firmware.
5: Select output directory and filename.
6: Click on Build MFW
7: Rename output PUP to PS3UPDAT.PUP and install on the PS3.



OR

1: Download PS3MFW Bulder 0.2 Portable Win32 from the bottom of this post
(All of the tasks have been pre-selected for you).
2: Click on ps3mfw.exe
3: Press the Configure>> button next to Patch emergency init and
select how big to make your GameOS/OtherOS++ partition
4: Use REBUG 3.41.3 or 3.55.2 (http://rebug.me/?p=646) firmware as your input firmware.
5: Select output directory and filename.
6: Click on Build MFW
7: Rename output PUP to PS3UPDAT.PUP and install on the PS3.


Once you have your firmware installed go here (http://7track.org/~glevand/public/) and download the following files:

setup_flash_for_otheros.pkg
dtbImage.ps3.bin (For 16MB NOR) or dtbImage.ps3.bin.minimal (For 256MB NAND)
install_otheros.pkg
boot_otheros.pkg
reboot.pkg
create_hdd_region.sh
hdd_access.sh



Now that you have the necessary tools to begin installing OtherOS++ head over here (http://wiki.gitbrew.org/index.php/PS3:OtherOS%2B%2B#Install_OtherOS_on_HDD_.28for_al l_PS3_models.29) and READ AND FOLLOW the guide properly, starting at step 2. These guys have put a lot of time into getting this to work so we’ll say it again, READ AND FOLLOW the guide.

Enjoy

~Codename: REBUG Team


As usual for all the direct support on their latest releases visit them right here on PS3Crunch (http://www.ps3crunch.net/forum/threads/67-REBUG-3.41.3-and-3.55.2-OTHEROS) and enjoy getting your Linux back into the PS3 Console!