Olygame

DigiTopZ #2

ModChipCentral

Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39
  1. #1
    JLM
    Guest

    CEX -> DEX -> CEX Information Survey

    This thread is for those who have made CEX to DEX to CEX to post their information only

    Please provide the following information:

    PS3 model #: ( 2501A)
    Original Firmware #: ( 3.55)
    Highest Firmware #: ( 3.55FW)
    Console QA yes/QA no: ( QA yes)
    CEX Firmware before conversion: (3.55.2 rebug oos)usb
    DEX Firmware after conversion:
    Highest Dex Firmware used:
    Final Dex Firmware:
    Specify Region Changes: (none)
    All CEX Firmwares after conversion:
    Brick/Not Brick:
    Notes: 3.55ofw, 3.55.2rebug oos(XMB, usb), 3.55dex(XMB, usb), etc. ------->final firmware

    Thank you.

    If brick->unbrick, please state when brick occurred and your procedure for unbricking. For firmware installation specify method (XMB, recovery, FSM) and device used (usb, hdd, pc, dongle).

    Questions about CEX and DEX post here: http://www.ps3crunch.net/forum/threa...getID-Settings
    or here: http://www.ps3crunch.net/forum/threa...users-released
    Last edited by JLM; 07-24-2012 at 06:23 PM.

  2.     
  3. The Following 3 Users Say Thank You to JLM For This Useful Post:

    gDrive (07-24-2012), STLcardsWS (07-25-2012), Yuu (07-24-2012)

  4. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    478
    Total Thanks Given
    250
    Total Thanks Received
    377
    Total Thanked Posts
    199
    CEX - DEX = OK
    DEX - CEX Got brick


    PS3 model #: Cechk01 ( Fat )
    Original Firmware #: Don't remember. Like 2.xx
    Highest Firmware #: 3.55
    Console QA yes/QA no: yes
    CEX Firmware before conversion: 3.55 orginal
    DEX Firmware after conversion: 4.11
    Highest Dex Firmware used: 4.11
    Final Dex Firmware: Dex Downgrader
    Specify Region Changes: (none)
    All CEX Firmwares after conversion:

    Bricked going from Dex - Cex
    I was in Dex Downgrade firmware , clicked the CEX Flash in multiman, then bricked, could not boot into XMB or service mode.
    Beeps 8 times

    Used E3 reader with rogero nobd pup
    then went to orginal then to Kmeaw

    Edit- fixed

  5. The Following 4 Users Say Thank You to Piratan For This Useful Post:

    2615863 (07-24-2012), gDrive (07-24-2012), Yuu (07-24-2012)

  6. #3
    Crunchtarded Asshole!
    Join Date
    Jul 2011
    Posts
    3,859
    Total Thanks Given
    13,229
    Total Thanks Received
    4,938
    Total Thanked Posts
    2,417
    Jalim
    Thread stickied as I feel that this thread is very important for those who want to know how things have went with the CEX-DEX-CEX firmware/system changes.

  7. The Following 3 Users Say Thank You to gDrive For This Useful Post:

    pete_uk (07-25-2012), toto67 (07-24-2012)

  8. #4
    Senior Member
    Join Date
    Jul 2011
    Location
    On top.
    Posts
    393
    Total Thanks Given
    137
    Total Thanks Received
    423
    Total Thanked Posts
    221
    PS3 model #: ( 2101b)
    Original Firmware #: ( 3.40)
    Highest Firmware #: ( 3.55FW)
    Console QA yes/QA no: ( QA no)
    CEX Firmware before conversion: (3.55.2 rebug homebrew edition)
    DEX Firmware after conversion: Rogero 3.55 DEX downgrader peek and poke CFW
    Highest Dex Firmware used: Rogero 3.55 DEX downgrader peek and poke CFW
    Final Dex Firmware: 3.55 DEX downgrader from ps3devwiki
    Specify Region Changes: (84 to 82)
    All CEX Firmwares after conversion: Rogero 3.4 spoofed 4.21 found on ps3devwiki
    Brick/Not Brick: Was Bricked--->Not bricked now
    Notes: 3.40 ofw, 3.41ofw, 3.41 HERMES, 3.55ofw, 3.55.2 rebug 3.55.2 (homebrew edition), 3.55dex(Rogero 3.55 DEX dwngrdr p&p CFW), ps3devwiki 3.55DEX_dwngrdr ------->final firmware= Rogero 3.4 spoofed 4.21 found on ps3devwiki

    Bricked going from Dex - Cex
    I was in Dex Downgrade firmware , clicked the CEX Flash in multiman, then bricked, could not boot into XMB.
    Beeps 8 times

    used a Teensy board and PSgrade to go in Factory Service Mode

    Fixed
    Last edited by CloneD; 08-06-2012 at 12:49 AM.

  9. The Following 3 Users Say Thank You to CloneD For This Useful Post:

    gDrive (07-25-2012), Piratan (07-26-2012)

  10. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    425
    Total Thanks Given
    386
    Total Thanks Received
    627
    Total Thanked Posts
    294
    PS3 model: CECH-25...
    Original Firmware: 3.40
    Highest Firmware: 3.55 CEX
    Console QA (yes/no): yes
    CEX Firmware before conversion: 3.55 CEX Kneaw
    DEX Firmware after conversion: 3.55 DEX OFW
    Highest Dex Firmware used: 4.11 DEX OFW
    Final Dex Firmware: 3.55 DEX Peek and Poke
    Specify Region Changes: 85 on CEX to 82 on DEX
    All CEX Firmwares after conversion: 3.55 CEX Kneaw -> Flashed DEX.EID0.NORBIN (Multiman CEX) -> 3.55 DEX OFW (from XMB - usb) -> 4.11 DEX OFW (from XMB - hdd) -> 3.55 DEX Downgrader (from XMB - hdd) -> 3.55 DEX OFW (from Recovery - USB) -> Flashed CEX.EID0.NORBIN (Multiman CEX) -> 3.55 CEX Kneaw (from XMB - USB) -> Flashed DEX.EID0.NORBIN (Multiman CEX) -> 3.55 DEX Peek and Poke (from XMB - USB) -> Flashed DEX.EID0.NORBIN (Multiman CEX) -> Brick (video)
    Brick/Not Brick: Bricked in second DEX2CEX conversion (not bricked in DEX2CEX conversion)
    Notes:
    -
    All the DEX2CEX and CEX2DEX flash EID0 conversions were made in multiman CEX version- The brick and you to recover from it is described in this post
    -
    If you backed up your data and installed linux, restore your data on CEX before going to DEX. And careful in the DEX2CEX conversion

    Status: waiting for the dongle to arrive to try to fix it

    I think all the bricks so far (5 that i know of) are related to DEX2CEX conversions and not CEX2DEX.
    Last edited by andreus; 07-25-2012 at 04:53 AM.
    XMB Manager Plus co-developer | Showtime translator | WEBmedia plugin for Showtime developer

  11. The Following 3 Users Say Thank You to andreus For This Useful Post:

    gDrive (07-25-2012), Piratan (07-26-2012)

  12. #6
    Crunchtarded Asshole!
    Join Date
    Jul 2011
    Posts
    3,859
    Total Thanks Given
    13,229
    Total Thanks Received
    4,938
    Total Thanked Posts
    2,417
    Model Number:
    CECH-2503B

    Original Firmware:
    3.55OFW

    Highest Firmware BEFORE the CEX-to-DEX Conversion:
    3.55CFW KMEAW

    Console QA Flag Status:
    Disabled (before CEX-to-DEX Conversion) - Enabled during the Rollback Brick Fix/Syscon Hash Reset phase

    CEX Firmware Before Installation:
    3.55CFW KMEAW (CEX)

    DEX Firmware After Installation:
    3.55OFW DEBUG (DEX)

    Highest DEX Firmware Used:
    4.11OFW DEBUG (DEX)

    Last DEX Firmware Used Before DEX-to-CEX Rollback:
    3.55OFW DEBUG with Downgrade Support (DEX)

    Region/TargetID Changes:
    87 (UK) > 82 (DEBUG) > 87 (UK) (brick phase happened when trying to restart the console after the TargetID change and then restarted the console)

    Firmware Changes Made on my PS3:
    3.55OFW CEX > 3.55CFW KMEAW CEX > 3.55OFW DEX > 4.11OFW DEX > 3.55OFW with downgrade support (DEX) > [BRICKED whilst changing TargetID back to 87 and restarted the console] > 3.55CFW Rogero with Patched LV1/LV2, 4.20 PSN Spoof and no-BD Fixes (CEX) > 3.55CFW KMEAW (CEX)

    Brick Phase:
    When converting back to CEX by changing the TargetID and then decided to restart the console, but then the console wouldn't start up.

    Brick Fixing Process/Status:
    Used a rooted & PSgrade bootloader/recovery image-modded HTC Desire Z to put the PS3 into service mode, and then followed tul/andreus's tutorials for the rollback brick fix, and eventually Rogero's Syscon Hash Reset tutorial for reinstalling KMEAW firmware > STATUS: Console Fixed (will now be trying this again).

    Useful Links for Getting an Android Phone to act as a PSgrade Factory Service Jig (Other select devices may vary in terms of the rooting/bootloader installation phases)
    - [TUTORIAL] How to make an Android Phone act as a factory service mode jig (only on select smartphones) - PS3Hax
    - [GUIDE] Downgrade G2 (2.3.X) & DZ (2.3.X) & mT4g (2.3.4) & DHD w/ S-ON to Stock Froyo - XDA Developers
    - HTC Desire Z - Firmware Downgrade - Android 2.2 (Froyo) - CyanogenMod Wiki
    - HTC Desire Z - Rooting - CyanogenMod Wiki
    - psfServiceMod Recovery Images - Mediafire

    Useful Links for Getting a Programmable Dongle/Development Board to act as a PSgrade Factory Service Jig
    - CloneD's Post on PSgrade Hexes for Development Boards/Dongles - PS3Crunch
    - PSgrade Hexes - Mediafire
    Last edited by gDrive; 08-23-2012 at 07:39 AM.

  13. The Following 5 Users Say Thank You to gDrive For This Useful Post:

    aldostools (07-30-2012), Piratan (07-26-2012), tonybologna (07-29-2012)

  14. #7
    Senior Member
    Join Date
    Dec 2011
    Posts
    478
    Total Thanks Given
    250
    Total Thanks Received
    377
    Total Thanked Posts
    199
    Glad you got it Fixed gdrive and thanks for the droid guide. I am sure when people start converting back to cex we will see more and that will be the goto method to fix it for them. Kudos!

  15. The Following User Says Thank You to Piratan For This Useful Post:

    gDrive (07-26-2012)

  16. #8
    Crunchtarded Asshole!
    Join Date
    Jul 2011
    Posts
    3,859
    Total Thanks Given
    13,229
    Total Thanks Received
    4,938
    Total Thanked Posts
    2,417
    Quote Originally Posted by Piratan View Post
    Glad you got it Fixed gdrive and thanks for the droid guide. I am sure when people start converting back to cex we will see more and that will be the goto method to fix it for them. Kudos!
    No problem - however, the PSFreedom (PSgrade) FSM project seems to have stopped at the devices that are more or less at the end of its market life, and I personally wish that someone would step up the plate and make it available to more devices in the form of a standard application or a universal bootloader/recovery application.

  17. The Following 2 Users Say Thank You to gDrive For This Useful Post:

    Piratan (07-26-2012)

  18. #9
    Junior Member
    Join Date
    Oct 2011
    Posts
    6
    Total Thanks Given
    0
    Total Thanks Received
    3
    Total Thanked Posts
    2
    PS3 model #: 25XX
    Original Firmware #: 3.55
    Highest Firmware #: Kmeaw 3.55
    Console QA yes/QA no: QA yes
    CEX Firmware before conversion: Kmeaw 3.55
    DEX Firmware after conversion: 3.55 DEX
    Highest Dex Firmware used: harryoke 3.55 DEX lv1 & lv2 peek and poke added
    Final Dex Firmware: 3.55 DEX
    Specify Region Changes: 84 -> 82
    All CEX Firmwares after conversion: Brick from DEX. Unbrick ,Rogero v3.1 -> OFW 3.55 CEX
    Brick/Not Brick: Brick when converting from DEX back to CEX

    Brick when attempting back to CEX from DEX. I have slow internet connection to download 3.55 DEX downgrader lol. MM won't flash CEX dump. Tried to flash CEX dump with E3 and on half way flashing PS3 beep 3 times end error on E3. Now PS3 brick.

    Patch CEX dump with downgrade v2 and flash it on PS3. PS3 boot up normally but with DEX firmware (fix it without using FSM dongle). Installed Rogero v3.1 then OFW 3.55 to check PS3 on CEX.

    Patch DEX 3.55 dump with downgrade v2 then flash it to PS3. PS3 on DEX with CEX firmware. Install DEX 3.55 to check it on DEX. Now on DEX 3.55

  19. The Following 2 Users Say Thank You to poiuyt For This Useful Post:

    gDrive (07-26-2012)

  20. #10
    Junior Member
    Join Date
    Jul 2012
    Posts
    7
    Total Thanks Given
    1
    Total Thanks Received
    3
    Total Thanked Posts
    3
    It seems that most DEX to CEX end up in brick. It would help a lot to put a tutorial on how to go back to CEX from DEX. I don't know much about syscon or hashes. Thanks

  21. The Following User Says Thank You to chocobo2k For This Useful Post:

    gDrive (07-28-2012)


 
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
EachGame