multiMAN -- Crunching Support & Releases

[Fox_Hound]

Cool.Well I sent a little Paypal your way Deank as a small token of my appreciation for your legendary work.

[deank]

This is true and as gDrive said - LV1 peek/poke is required for the function to work and it is not available on rogero/e3/blabla 4.** firmwares (except rebug).

[tekken]

Thx for the TIP about loading PSN from MM, never seen it, couldn't resist testing one..lol
example: Bomberman Ultra

It could be enough that command-line, this however... worked perfect on my side and booted directly but like DeanK mentioned, not so much compactibility with games
first try straight boot..must be a lucky one, atleast it's nice that they show up..looks cool


Resign command for (normal) RELOAD.SELF - Bomberman Ultra

echo Please put EBOOT.BIN/ELF in the extracted folder first...
pause
IF NOT EXIST EBOOT.ELF (
scetool.exe --decrypt EBOOT.BIN EBOOT.ELF
rename EBOOT.BIN EBOOT.BIN.BAK
scetool.exe -v --sce-type=SELF --compress-data=TRUE --skip-sections=TRUE --key-revision=10 --self-auth-id=1010000001000003 --self-vendor-id=01000002 --self-type=APP --self-app-version=0001000000000000 --self-fw-version=0003006000000000 --encrypt EBOOT.ELF RELOAD.SELF
) ELSE (
rename EBOOT.BIN EBOOT.BIN.BAK
scetool.exe -v --sce-type=SELF --compress-data=TRUE --skip-sections=TRUE --key-revision=10 --self-auth-id=1010000001000003 --self-vendor-id=01000002 --self-type=APP --self-app-version=0001000000000000 --self-fw-version=0003006000000000 --encrypt EBOOT.ELF RELOAD.SELF
)
echo Auto-resign finished.
pause

Thank you for your post!
I just start cracked Bomberman (PSN pkg) direct from MM. Now you don't need to install the pkg. Just unpack pkg on your PC -> copy to hdd0/game/gamedir(NPUB30051) -> put your reload.self in dir where eboot.bin file -> refresh mM -> press X on gamelogo in mM.
So, bomberman works good with online crack, but I can't direct run Double Dragon NEON (black screen), maybe I'm did something wrong? maybe I must change some cmd's for this game (--key-revision=10 for example)?

to deank: mM scaning games with reload.self only in hdd0/game, if I put the dir with game on hdd0/GAMES mM don't found this game, Why?

[tekken]

About play in PSN game from MultiMan. I have tested another game 3 on 3 NHL Arcade.
All works fine, but I must install psn pkg first to play. If just Install trial of game -> delete game folder hdd0/game/NPUB30058 -> copy ready NPUB30058 (with crack+RELOAD.SELF) in hdd0/game/ all works good. But if I just copy ready NPUB30058 (with crack+RELOAD.SELF) in hdd0/game/ without install pkg I have blackscreen.
Like I think the game added some file in somewhere when installed.
Please anybody help to resolve this thing, because I don't want alot of .lnk in XMB. I want to see and start all of games only from MultiMan.

[kilkip]

@tekken

edit: ah..ok, after re-reading you want it like that... NO XMB links, only from MM
i think this not work, correct anyone if not true..nice idea..no xmb clutter of psn games

If you do it like that, drop/ftp the fixed game into hdd0\game it indeed Black Screens on you ( shows on MM - not on XMB).

This is in a way normal?, cuse dropping a game like that without installing into "hdd0\game\" on CEX wont show up on XMB right?!
This is then fixed by "Rebuilding the Database" in Recovery on REX4.21" - then the game 3 on 3 NHL Arcade is working again, from XMB&MM

why not just drop the demo's pkg onto "internal and also the fixed eboot+reload.self, otherwise you must do a Recovery Database after dropping the folder
all in all what is faster? lol..., may be via REX-DEX-TM-debuggermode-drag param.sfo for install fixed game, faster? may be if doing alot at once ... this way might work though
in CEX it wont work i guess..

i've tested it for you and getting the same results, only a Rebuild Database worked after "dropping" fixed game folder"


ps: doesn't matter the key-rev used aslong not blocked > check ps3devwiki-keys..greyed out are blocked keys)

Resign EBOOT for MM as original Firmware 2.40 +key-rev 00 - APP - RELOAD.SELF

scetool.exe -v --sce-type=SELF --compress-data=TRUE --skip-sections=TRUE --key-revision=00 --self-auth-id=1010000001000003 --self-vendor-id=01000002 --self-type=APP --self-app-version=0001000000000000 --self-fw-version=0002004000000000 --encrypt EBOOT.ELF RELOAD.SELF

Resign as Original signed EBOOT/NPDRM - 2.40 - key-rev 01 - NPDRM - Fixed EBOOT.BIN

scetool.exe -v --sce-type=SELF --compress-data=TRUE --skip-sections=TRUE --key-revision=01 --self-auth-id=1010000001000003 --self-add-shdrs=TRUE --self-vendor-id=01000002 --self-type=NPDRM --self-app-version=0001000000000000 --self-fw-version=0002004000000000 --np-license-type=FREE --np-content-id=%cid% --np-app-type=EXEC --np-real-fname=EBOOT.BIN --encrypt EBOOT.ELF EBOOT.BIN

or 3.60/10 or up, all the same really

so far 2 out of 2 direct booting via MM...ya gotta love it..Splinter Cell series lemme try

This is build in from way back 02.00.00 and never noticed it...lol...

[rednekcowboy]

Hey DeanK,

Quick question--and I apologize if it's been asked before as I wasn't around but is it possible to do a fan mod within MM to adjust fan speed, kind of like freestyle dash for the 360?

[deank]

A minor update:

multiMAN ver 04.11.12 BASE CEX (20121116) (22.76MB)
http://www.sendspace.com/file/lzcyn1

* Fixed LV1 peek/poke for 4.21REX in DEX mode + DEX lv2_kernel
* Added back IDPS display in "System Information"
* Added preliminary support for 4.30CFW with LV1 peek/poke syscalls (sc 8/9) or lv1 mmap patch (hvsc 114)
(if such CFW is released then direct-disc-access/PS1 disc backups should work)
* Increased number of supported simultaneous FTP transfers to 8
* FTP user/password can be anything
* Added support for "Change BD-Movie Region" function for 4.30CFW
* Updated Showtime to 04.01.224

multiMAN ver 04.11.12 BASE DEX (20121116) (25.77MB)
http://www.sendspace.com/file/s2rhub

[lynzoid]

Thanks! What do you recommend for rebug users? Install both? Or use CEX in both modes?

[Agrippa90]

in other forum say that boot disks ps1 via Multiman can damage the lens, is true?

[deank]

Thanks! What do you recommend for rebug users? Install both? Or use CEX in both modes?

CEX version works just fine on 4.21REX in any mode

in other forum say that boot disks ps1 via Multiman can damage the lens, is true?

In that "other" forum they say a lot of stupid things.