If you lost your CEX FLASH NOR I can covert your DEX FLASH to CEX

[Dominykas Je]

Try these steps to try and get your eid_root_key:

2- Copy rogero FW v3.4

Can I use Rogero FW v3.5? Because I cant find any link for v3.4

[Thepunisherg4]

Try these steps to try and get your eid_root_key:

1- Since you are already on itskamel dex 3.55, install FactoryServiceModeV2.pkg 2- Copy rogero FW v3.4 and lv2diag.self to the root of a usb and connect it to the most right usb door on your PS3 3- Start FSM. it will beep and return to xmb. then start FSM again and let it do its job 4- After all done, PS3 will turn off, remove usb, delete files, but rename lv2diag_exit.self to lv2diag.self. 5- Connect again to ps3, and turn on PS3, it will turn on and off in 4/5 seconds. 6- Remove usb, and turn on PS3, it will now turn on normally, and you'll be on a partially DEX/CEX CFW ROGERO v3.4 7- Now install multiman 4.03, only on that works on it, and install eid_rkdumper.pkg 8- Start dumper, ps3 will beep and reboot. 9- Go to multiman, and get your file at dev_hdd0/tmp and copy it to a usb

Cant find rogeto cfw 3.4..i've searched everiwhere...

[sincere87]

[QUOTE=PatrickBatman;55281]I will only do DEX NOR to CEX NOR from multiman dump. I can do NAND but choose not to as I have a CAPPED internet and NAND dumps are much bigger than NOR.

Hi i'm new on here and this jus happen to me and i really want to get back to cex so i jus upload mman and it will tell me my dex nor flash dump? i'm on DEX 4.21."I'm not addicted games, its my anti-drug"

[Pdscoelho]

Also can not find Rogero v3.4...

[PatrickBatman]

Can I use Rogero FW v3.5? Because I cant find any link for v3.4

Cant find rogeto cfw 3.4..i've searched everiwhere...

Also can not find Rogero v3.4...

Can I use Rogero FW v3.5? Because I cant find any link for v3.4

Cant find rogeto cfw 3.4..i've searched everiwhere...

Also can not find Rogero v3.4...

In my experience I could use Rogero v3.4-3.7 with most things, didnt matter which version, but as far as the getting eid_root_key on DEX
i dont know. As i havent done this

[Thepunisherg4]

when i get my eid_root_key what are my next steps?
if you give me a guide i can try to do it by myself!
i like this kind of "experiment"
thx PatrickBatman

[Pdscoelho]

There's a link for rogero 3.4 on page 4 of this thread :-)

[punker]

Hi could i get some help

I have these files I,m on 3.55dex want to go back cex

Backuprflash.bin 256 nand
dump.bin
eEID0.bin
eid0_1st_Section_CEX.bin

I tried c2d to convert but came up with this Wrong format of EID key file?

[Pdscoelho]

Please help me, how do I dump my NOR once on DEX? I lost my original dump.
I have dumped the eid key using the earlier instructions....

[PatrickBatman]

when i get my eid_root_key what are my next steps?
if you give me a guide i can try to do it by myself!
i like this kind of "experiment"
thx PatrickBatman

http://ps3scenefiles.com/file.php?id=1195

There's a link for rogero 3.4 on page 4 of this thread :-)

here it is again: http://www.fileshare.ro/4.16319103316E+12
I DID NOT UPLOAD THIS

Hi could i get some help
I have these files I,m on 3.55dex want to go back cex
Backuprflash.bin 256 nand
dump.bin
eEID0.bin
eid0_1st_Section_CEX.bin

I tried c2d to convert but came up with this Wrong format of EID key file?

You have an OLD version c2d if wont convert nand, use http://ps3scenefiles.com/file.php?id=1195 also your nand dump should be 239MB not 256MB

Please help me, how do I dump my NOR once on DEX? I lost my original dump.
I have dumped the eid key using the earlier instructions....

Get on 355 DEX use CEX multiman dump it the same was as before