Thanks a lot. I have been googling all morning. I can't find the right tutorial. When I find the right tutorial all the files are too old to download. I got up to the step where the ps3 turns off after psfreedom from iphone but when I turn the ps3 back on it gives the beeps again. Can you direct me to a working tutorial. If not can you recommend the right dongle to use
Thanks a lot. I have been googling all morning. I can't find the right tutorial. When I find the right tutorial all the files are too old to download. I got up to the step where the ps3 turns off after psfreedom from iphone but when I turn the ps3 back on it gives the beeps again. Can you direct me to a working tutorial. If not can you recommend the right dongle to use
What files have you got on USB if you click the YouTube video I have the correct lvl2diag.self files posted as a link also what firmware you using and is it a stand alone USB yes no other files on it
What files have you got on USB if you click the YouTube video I have the correct lvl2diag.self files posted as a link also what firmware you using and is it a stand alone USB yes no other files on it
I have the lv2diag and PS3UPDAT.PUP its a regular usb. Here's what I did
1. Install bootlace on iPhone 3G
2. plug into ps3 then press eject + power
3. Wait for system to turn off
4. unplug iphone and insert usb
5. turn on the ps3
6. get the 10 beeps.
Also try different usbs also it should beep with the dongle not the USB
I got to the point where the ps3 was reading the usb drive but after about 2 minutes the led just kep blinking and nothing happened. I left it for 20 minutes and just blinked so I turned off the ps3. This is my log.
manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 59 msec
check UPL
Check UPL elapsed time = 63 msec
check Package Size
get package size elapsed time = 8 msec
start Updating Package
Update packages num = 30
Update packages total size = 162260220
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 10 msec
update package revoke list elapsed = 119 msec
Update Package Revoke list done(0x8002f000)
Update Core OS Package
read core os package (5182047 bytes) elapsed = 299 msec
update core os package elapsed = 223 msec
Update Core OS Package done(0x8002f14b)
update package elapsed time = 651 msec
Updating or Verifying failure 0x8002f14b
UpMng.UpdatePackage() failure
manufacturing updating FAILURE(0x8002f14b)
Total Elapsed time = 18241 msec