Displays Firmware version, Toolbox version, IP address, current LV2 Kernel and Target ID type and free HDD space.
Quits Toolbox and returns you to PS3 XMB.
Perform either a Full or Soft reboot od the PS3 system.
Soft (LV2 Reboot Only
Full (On/Off Cycle
Boot OtherOS with either your currently selected LV1 patches or easily apply ALL LV1 patches and boot.
Boot (LV1 Patches: Apply All
Boot (LV1 Patches: Use current
TURN OFF SYSTEM:
Shut down your PS3.
SELECTOR (REBUG FIRMWARE ONLY)SYSTEM MODE:
Switches between NORMAL
mode which uses the DEBUG
XMB is the default mode after installing Rebug.
mode sets the PS3 to the latest available version spoof (updatable in the future) and allows swapping between RETAIL
XMB OPERATION MODE:
This option only works in REBUG
mode and lets you select either the RETAIL
DEBUG MENU TYPE:
Gives you the choice of the CEX QA (retail) or DEX (debug) Debug Settings menu.
A collection of LV1 patches that can be used for better compatibility with some PS3 tools. Any combination of these patches can be applied before booting OtherOS.
CEX/DEX (REBUG REX EDITION ONLY)
SWAP LV2 KERNEL:
Swaps between CEX and DEX LV2 Kernel. This option will only work if your Target ID is set to DEX
REWRITE TARGET ID IN FLASH:
This option requires you have a valid NOR/NAND dump named correctly on dev_usb000. Use EXPORT FLASH TO FILE function to dump your NOR/NAND to dev_usb000 and then use c2d.exe
to convert your dump to DEX.
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN
(16mb) or CEX-FLASH.EID0.NANDBIN
(239mb or 256mb)
Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN
(16mb) or DEX-FLASH.EID0.NANDBIN
(239mb or 256mb)
Once you have prepared your NOR/NAND dumps place them on a USB device and connect it to dev_usb000.
Now that you have your valid dumps named properly and connected to dev_usb000 it is a simple as selecting the option and following the onscreen prompts. Takes less than 10secs once you have your dumps prepared.
Enable/Disable QA flag. This option is only available in REBUG 3.55.3 REX EDITION
and 3.55 CFW as we are not able to set QA token at the moment from GameOS on higher firmware.
TOGGLE RECOVERY MODE:
Enable/Disable Recover Mode flag. When enabled your PS3 will reboot into Recovery Mode.
TOGGLE PRODUCT MODE:
Enable/Disable Product Mode flag. When enabled your PS3 will reboot into Factory Service Mode. This option is only available in REBUG 3.55.3 REX EDITION
and 3.55 CFW for safety reasons.
LOAD LV2 KERNEL:
Load lv2_kernel.self.[KERNEL_NAME] from USB or /dev_hdd0
RESIZE VFLASH/NAND REGIONS:
Resize VFLASH/NAND Region 5 to allow install of OtherOS.
Install Petitboot to VFLASH/NAND Region 5 from USB.
SET GAMEOS BOOT FLAG:
Sets the GameOS boot flag. Use this if your PS3 is having trouble booting PS2 titles after running OtherOS or is accidently sending you back to OtherOS when trying to enter recovery mode.
CREATE PACKAGES FOLDER ON PS3:
Create /dev_hdd0/packages folder or your PS3 to be used with Package Manager.
EXPORT HYPERVISOR LV1 MEMORY:
Save LV1 memory to dev_usb000 or dev_usb006 or dev_hdd0 if usb is not found.
EXPORT GAMEOS LV2 MEMORY:
Save LV2 memory to dev_usb000 or dev_usb006 or dev_hdd0 if usb is not found.
EXPORT FLASH TO FILE:
Backup your current NOR/NAND to file on dev_usb000. Takes about 45secs for NAND.
CHANGE ACTIVE PS3ID:
Spoof IDPS in LV2 memory. Choose from Use EID0
or Use EID5
. EID5 will spoof your original CEX IDPS allowing you to connect to PSN if your PS3 is running REBUG REX EDITION
firmware in DEX mode. This option is only available in REBUG 4.21.x REX EDITION
and below at the moment.
OTHER TOOLBOX FEATURES:
L3 changes clock/temperature display
L2+R2 enable screensaver
START+R2 take a raw rgb screenshot
Remote-play via PSP/PSVITA
Auto-turn-off if idle for 1 hour
Telnet to PS3 ip at port: 8080
FTP access with writable dev_flash mounted as dev_rebug
(port: 21, user: anonymous, password: (anything))