\r\n Wait a minute, you had code unique working on 4.30? Or was it the official v3? \n \nAt any rate. The homebrew that you are talking about is likely not signed for 4.46 which is why it\'s not working. You can try to find updated versions of them (well code unique doesn\'t have one afaik) or go back down to where they were working.\r\n
\r\n haha, I actually just downgraded to 3.55 and went back to 4.30.2 just to check and as I was suspecting, didn\'t work there either. It\'s been a while since I\'ve used it that I must have mixed up FW\'s. \n \nI did find code unique updated for 4.XX on hax. \nInstalling it right now to check and see if it works on 4.46.1. will post results. \n \nEDIT \nNope, no dice. \nDon\'t get an error, just returns to xmb\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n
\r\n \r\n Last edited by AugustSKY; 08-06-2013 at 07:45 AM.\r\n \r\n \r\n
\r\n \r\n \r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Originally Posted by CookieMonster\r\n \r\n
\r\n
Life isn�t always: "give me... now". Respect the one who release his work for free...
\r\n I don\'t know anything about code unique, but running some applications requires more than the default patches applied (in the rebug toolboox).\r\n
\r\n Please help..installed rebug 4.46.1 rex and my console bricked. \nJust kidding. \nInstalled a rebug cfw for the very first time, and it works flawlessly. \nThanks to rebug team for the custom firmware. \nThanks to msschuhmacher for providing me with a precise guide on how to change to rebug.\r\n
\r\n i brckd my ps.3 nd its all ur falt reberg teem i hte u \n \nJust kidding. Great job, thank you for all your hard work and dedication to providing the best firmware out there!\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n\r\n\r\n\r\n\r\n\r\n \r\n
Trust, encouragement, reward, loyalty... satisfaction. That\'s what I\'m... you know. Trust people and they\'ll be true to you. Treat them greatly, and they will show themselves to be great.
\r\n I have a problem recently I\'m in Rebug 4.46.1 REX CFW I bought new 2.5 HDD & check in PC & use EASEUS Partition Master if it is detected & working properly, it has unallocated disc drive try to reformat it to NTFS to access it & transfer some files & it transfer as normal no issue then deleted again the NTFS so it came back to unallocated disc drive. Then I put my new 2.5 HDD to PS3 & plug my USB stick w/ Rebug 4.46.1 REX CFW near PS3 BR Drive then everything\'s goes normal as formatting & installing the firmware but after PS3 reboot & asking press PS button its load as normal but after that it say The data is corrupted (8002F325). I checked again the MD5 of Rebug firmware to see if the code are match & it says yes it\'s match so I do it all over again but always failing after rebooting so what is the problem did I do it incorrect? please help.\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n
\r\n \r\n Last edited by Xtreamst; 08-06-2013 at 05:42 PM.\r\n \r\n \r\n
I have a problem recently I\'m in Rebug 4.46.1 REX CFW I bought new 2.5 HDD & check in PC & use EASEUS Partition Master if it is detected & working properly, it has unallocated disc drive try to reformat it to NTFS to access it & transfer some files & it transfer as normal no issue then deleted again the NTFS so it came back to unallocated disc drive. Then I put my new 2.5 HDD to PS3 & plug my USB stick w/ Rebug 4.46.1 REX CFW near PS3 BR Drive then everything\'s goes normal as formatting & installing the firmware but after PS3 reboot & asking press PS button its load as normal but after that it say The data is corrupted (8002F325). I checked again the MD5 of Rebug firmware to see if the code are match & it says yes it\'s match so I do it all over again but always failing after rebooting so what is the problem did I do it incorrect? please help.
\r\n \r\n
\r\n
\r\n
.............,,,,,,,,,!!!!!?????? I found those laying around; maybe you would like to borrow them so MAYBE we could understand the blockatext you dropped? Free of charge, of course!\r\n
.............,,,,,,,,,!!!!!?????? I found those laying around; maybe you would like to borrow them so MAYBE we could understand the blockatext you dropped? Free of charge, of course!
\r\n \r\n
\r\n
\r\n
\r\n
\r\n
\r\n \r\n \r\n
\r\n Originally Posted by Xtreamst\r\n \r\n
\r\n
If Rebug 4.46.1 REX is safe for upgrading PS3 HDD? I have 4.46.1 REX Edition but my PS3 HDD is failing need to upgrade or need to downgrade 1st to 3.55?
\r\n \r\n
\r\n
\r\n
This is my 1st question that never answer. \nhttp://www.ps3crunch.net/forum/threa...D-2013/page120 \n \nMy problem is I replaced my faulty PS3 HDD w/ new one but after installing the PS3UPDAT.PUP file (REBUG 4.46.1 REX) It gives me an error "The data is corrupted. (8002F325)" I tried to check the MD5 of Rebug PUP files & it matched so there is no problem w/ the files. I check again my new HDD & it\'s work properly. Try under recovery menu but no luck same error so my question is if my PS3 screwed!?\r\n
This is my 1st question that never answer. \nhttp://www.ps3crunch.net/forum/threa...D-2013/page120 \n \nMy problem is I replaced my faulty PS3 HDD w/ new one but after installing the PS3UPDAT.PUP file (REBUG 4.46.1 REX) It gives me an error "The data is corrupted. (8002F325)" I tried to check the MD5 of Rebug PUP files & it matched so there is no problem w/ the files. I check again my new HDD & it\'s work properly. Try under recovery menu but no luck same error so my question is if my PS3 screwed!?
\r\n \r\n
\r\n
\r\n
Somewhat confused by the info you provided and your signature (3 CFWs listed). What CFW were you on when your original HDD crashed? I would try putting this CFW back on the memstick and install with the new drive.. then if all goes well, proceed with CFW changes.\r\n
Somewhat confused by the info you provided and your signature (3 CFWs listed). What CFW were you on when your original HDD crashed? I would try putting this CFW back on the memstick and install with the new drive.. then if all goes well, proceed with CFW changes.
\r\n \r\n
\r\n
\r\n
Sorry my sig are not updated but I used the newest Rebug 4.46.1 REX Edition before installing the new HDD. So after installing the new HDD I put the Rebug 4.46 REX Edition to my USB Stick (PS3/UPDATE) folder then plug the USB Stick near PS3 BR Drive then I press on my PS3 then system notify me that I recently using 4.46 firmware so I press Start + Select then PS3 detect the firmware in the USB so I press Start + Select again so after completion of the process PS3 reboot after that PS3 is checking after that it say "The data is corrupted (8002F325)" I check the Rebug .PUP to MD5 in my USB Stick & it\'s match so there\'s no way the file is corrupted. Try again to my other but old 2.5 HDD but the problem now it\'s always stack at 99% I keep try & try changing the HDD but now this is the worse my PS3 only open atleast 5 second then automatic turn off. So it is possible that my PS3 is failing not the HDD? or I messed up of installing the FW? Right now I can\'t go to recovery menu coz the PS3 is automatic shut down after 5 second interestingly it never turn off when the HDD is not installed in PS3 but system only notify me that ther is no HDD in the system.\r\n
Sorry my sig are not updated but I used the newest Rebug 4.46.1 REX Edition before installing the new HDD. So after installing the new HDD I put the Rebug 4.46 REX Edition to my USB Stick (PS3/UPDATE) folder then plug the USB Stick near PS3 BR Drive then I press on my PS3 then system notify me that I recently using 4.46 firmware so I press Start + Select then PS3 detect the firmware in the USB so I press Start + Select again so after completion of the process PS3 reboot after that PS3 is checking after that it say "The data is corrupted (8002F325)" I check the Rebug .PUP to MD5 in my USB Stick & it\'s match so there\'s no way the file is corrupted. Try again to my other but old 2.5 HDD but the problem now it\'s always stack at 99% I keep try & try changing the HDD but now this is the worse my PS3 only open atleast 5 second then automatic turn off. So it is possible that my PS3 is failing not the HDD? or I messed up of installing the FW? Right now I can\'t go to recovery menu coz the PS3 is automatic shut down after 5 second interestingly it never turn off when the HDD is not installed in PS3 but system only notify me that ther is no HDD in the system.
\r\n \r\n
\r\n
\r\n
Did you happen to have a disc in the Blu-ray drive when you did all this? In any event, I would try to get to recovery mode and start over. I would also wipe all partitions off the HDD and return it to factory state first. If you cannot get to 4.46, then even reverting to OFW 3.55 might work then go Rebug 3.55 onto 4.46\r\n
\r\n Amazing firmware... congratulations Rebug! \n \nReally awesome... question: after installed the CFW, mM won\'t work... even the later version that supports 4.46 CFWs... \n \nHow can I repair this Cyberspunk? \n \n \nThanks again. Rebug is the best...\r\n
\r\n Since I recently updated my US Launch FAT PS3 from Rogero 4.41 to Rebug Lite 4.46, when I start playing a blu ray, the display goes black, then it just gets back to XMB and displays the message "Playbakc of BDs is prohibited on this system. Contact technical support for assistance" \r\n \r\nDid anyone else have this problem, and do you know why ?\r\n
\r\n Multiman 4.46.01 \nREBUG LITE 4.46 \n \nI came from rebug lite 4.41.2 with no problems from any game or multiman for that matter. \nWhat I get now are: \n \nMultiman freezing completely. \nMultiman sometimes sees my HDD. Thus, the games sometimes show, sometimes not no matter how much I refresh. \nMy HDD is fat32 32k cluster with just a bit under 2TB external space. \nGames are in GAMES/gamename \n \nWhat I get if the game actually does show and allow me to mount the game is; \nFreezing \nCrashing if I try to play 2 player. \nFor instance, I tried Dragons Crown. The game works 100% no problem, however, when I try to add a local player, the game will not move from the tavern area. \nSure, maybe its taking a while? Nope. I tried Injustice. I previously played the game without problems. I went to add a local player to vs mode, and bam frozen. \n \nI\'m on lite 4.46 rebug and 4.46 mM. \nWhat\'s going on here?\r\n
\r\n So, I had Rebug 4.42.2 Lite installed. I did previously have QA Enabled. I tried to install both 4.46.1 D-REX and 4.41.3 D-REX and both tell me the PUP file is corrupt. \r\n \r\nMy first thought was because I was on a Lite CFW, so I downgraded back to 3.55.4, and also double check QA flagging, which was still enabled. I then attempted installing both 4.46.1 D-REX and 4.41.3 D-REX again, only to be met with the same corrupted PUP file error. \r\n \r\nI was able to install 4.46.1 Lite, and all seems okay, but I\'m wondering what\'s up with the 4.46.1 D-REX and 4.41.3 D-REX files? I read a bunch of post about problems, but nothing that seemed like my specific problem.\r\n
I have a problem recently I'm in Rebug 4.46.1 REX CFW I bought new 2.5 HDD & check in PC & use EASEUS Partition Master if it is detected & working properly, it has unallocated disc drive try to reformat it to NTFS to access it & transfer some files & it transfer as normal no issue then deleted again the NTFS so it came back to unallocated disc drive. Then I put my new 2.5 HDD to PS3 & plug my USB stick w/ Rebug 4.46.1 REX CFW near PS3 BR Drive then everything's goes normal as formatting & installing the firmware but after PS3 reboot & asking press PS button its load as normal but after that it say The data is corrupted (8002F325). I checked again the MD5 of Rebug firmware to see if the code are match & it says yes it's match so I do it all over again but always failing after rebooting so what is the problem did I do it incorrect? please help.